Lumiscope 1098 - Manual (Page 9)

9
Description of Display Marks
DISPLAY MARK CONDITION/CAUSE CORRECTIVE ACTION
Pumping error.
The pressure measured
was less than 20 mmHg.
The pressure measured
was higher than
300mmHg.
Please measure
again.
The pumping pressure
is higher than
300mmHg.
Batteries are weak.
There is a problem with
the device.
Please measure
again.
Please check the cuff and
try again.
Please measure
again.
Replace the batteries.
Return to Lumiscope
service Department.
HI
or no display