Lumiscope 1098 - Manual (Page 5)

Measurement
NOTE: Unit measures on inflation.
• To start the measurement
Press the “ON/OFF” switch.
• Initial display.
• Pumping.
• Measuring and Beeping sounds.
• Once the blood-pressure measurement has stabi-
lized, pressurization is discontinued and the air in
the cuff is automatically let out.
• The buzzer sounds for about 2 seconds, and the
high and low blood pressure are respectively dis-
played one above the other.
• Unless an error is generated, the measurement
results are automatically stored in memory (Up to
42 sets of results can be stored ). When there are
already 42 sets of results in memory, the oldest one
is automatically erased and overwritten with the
newest.
5