Lumiscope 1098 - Manual (Page 6)

6
• Blood pressure values and pulse rate are
alternately displayed. The unit will continue
to display the measurement until power
is turned off.
• Turn Power off
Press the “ON/OFF” switch to turn off.
NOTE:
To discontinue a measurement for any reason, press the “Power/Start”
switch. This causes the “wrist cuff” to rapidly deflate.
Subsequent Measurement
When a measurement needs to be made again,
the time between 2 measurements must be at least 10 minutes.
Automatic Power OFF Function
If the unit is left on after measurement, an “Automatic Power
OFF Function” turns the power off after approximately
3 minutes. To continue with another measurement press
the “ON/OFF” switch to turn the unit on.