Lanier 5618 - Manual (Page 64)

Copier Feature Settings
5 - 8 User Tools Settings
11. Duplex Margin You can specify left margin on the back side of the copies
and the top margin on the front side of copies.
Default: 0.2
12. Key Op.Tools If the machine is set to use the User Code function,
operators must input their user codes before the machine
can operate. The machine can keep count of the number of
copies made under each user code.
1. User Code Access Specify whether to employ user codes to restrict copier
users and manage the number of copies made.
Default: Off
2. Check Copy Counter You can check the number of copies made under each user
code.
3. Print Counter List You can print counter lists.
4. Reset Counter You can check the number of copies made under each user
code. You can also reset each user code's counter to 0.
5. Clear all User Codes You can clear all user codes.
• The number of copies made under the old code is added
to that made under the new user code.
• The number of copies made under the deleted code is
also deleted.
6. Reset All Counters You can reset each user code's counter to 0.
7. Program User Code You can register user codes.
Up to 50 user codes (8 digits or less) can be registered.
8. Change User Code You can change user codes.
The number of copies made under the old code is added to
that made under the new user code.
9. Delete User Code You can delete user codes.
The number of copies made under the deleted code is also
deleted.
Menu Description