LevelOne FCS-5030 - Manual (Page 72)

B. URL commands of the Network Camera
Overview
For some customers who already have their own web site or web control application, Network
Camera/Video server can be easily integrated through convenient URLs. This section specifies
the external HTTP based application programming interface. The HTTP based camera
interface provides the functionality to request a single image, to control camera functions (PTZ,
output relay etc.) and to get and set internal parameter values. The image and CGI-requests
are handled by the built in Web server.
Style convention
In URL syntax and in descriptions of CGI parameters, a text within angle brackets denotes a
content that is to be replaced with either a value or a string. When replacing the text string also
the angle brackets shall be replaced. An example of this is the description of the name for the
server, denoted with in the URL syntax description below, that is replaced with
the string myserver in the URL syntax example, also below.
URL syntax' are written with the “Syntax:" word written in bold face followed by a box with the
referred syntax as seen below. The name of the server is written as . This is
intended to be replaced with the name of the actual server. This can either be a name, e.g.,
"mywebcam" or "thecam.adomain.net" or the associated IP number for the server, e.g.,
192.168.0.220.
Syntax:
http:///cgi-bin/viewer/video.jpg
Description of returned data is written with "Return:" in bold face followed by the returned data
in a box. All data returned as HTTP formatted, i.e., starting with the string HTTP is line
separated with a Carriage Return and Line Feed (CRLF) printed as \r\n.
Return:
HTTP/1.0 \r\n
URL syntax examples are written with "Example:" in bold face followed by a short description
and a light grey box with the example.