LevelOne FCS-5030 - Manual (Page 102)

PARAMETER VALUE DESCRIPTION
Method addallow Add a set of allow IP address range to server. Start
and end parameters must be specified. If the index
parameter is specified, it will try to add starting from
index position.
adddeny Add a set of deny IP address range to server. Start and
end parameters must be specified. If the index
parameter is specified, it will try to add starting from
index position.
deleteallow Remove a set of allow IP address range from server. If
start and end parameters are specified, it will try to
remove the matched IP address. If index is specified, it
will try to remove the address from given index position.
[start, end] parameters have higher priority then the
[index] parameter.
deletedeny Remove a set of deny IP address range from server. If
start and end parameters are specified, it will try to
remove the matched IP address. If index is specified, it
will try to remove the address from given index position.
[start, end] parameters have higher priority then the
[index] parameter.
start The start IP address to add or to delete.
end The end IP address to add or to delete.
index The start position to add or to delete.
return Redirect to the page after the parameter
is assigned. The can be a full URL path or
relative path according the the current path. If you omit
this parameter, it will redirect to an empty page.
RTSP SDP
Note: This request requires viewer access privilege
Method: GET/POST
Syntax:
http://<servername>/viewer/<0~(n-1)>/>