Lowrance electronic LCX-15MT - Manual (Page 20)

16
The cursor can be moved to any
location on the screen, letting you
pinpoint the depth of a target.
To show the depth cursor, press
the MENU key, then select “Depth
Cursor”. Press the ENT key. The
cursor appears at the top of the
screen. Use the arrow keys to
move the cursor to the desired
depth.
Erase the depth cursor by pressing the EXIT key.
CHART DATA
The digital information shown in
the upper left corner of the dis-
play along with the zone alarm
and zoom bar can be changed
using the Chart Data menu. To
use this menu, press the MENU
key, select “Chart Data Shown”
and press the ENT key. A screen
similar to the one at right appears.
The unit can show the digital
depth in large numbers (default), small numbers, or off. To change it, se-
lect the “Depth” label, then press the ENT key. Highlight the desired set-
ting using the arrow keys, then press the ENT key.
To change any of the other settings, on this screen, select them using the
arrow keys, then press the ENT key to select them. Press the EXIT key to
erase the menu when you’re finished.
SONAR FEATURES
Several key sonar options are
under the “Sonar Features” menu
on the main menu. Select the
main menu by pressing the
MENU key, then select “Sonar
Features” and press the ENT key.
The menu shown at right ap-
pears.