LG LH-CX245 - Manual (Page 47)

Operation
47
Tuning into a Station Manually
1. Press FM/AM on the remote control or on the
front panel until the frequency band appears
on the display and TV screen.
2. Press FM/AM on the remote control or on the
front panel to select the desired band.
3. Press + PRESET - on the front panel or hold
down 1 1 and 2 2 on the remote control to tune
in the desired station.
Tuning into a Station Automatically
Hold down + PRESET - on the front panel or hold
down
1 1 and 2 2 on the remote control for 1 or 2
seconds, and a station is searched for
automatically.
Note
The search may not stop at a station with a very
weak signal.
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, MUTING and MUTE indicator
appear in the display.
RDS Operation
This unit is equipped with RDS (Radio Data System),
which brings a wide range of information to FM radio.
Now in use in many countries, RDS is a system for
transmitting station call signs or network information,
a description of station programme type text message
about the station or specifics of musical selection and
the correct time.
RDS Tuning
When a FM station is tuned in and it contains RDS
data, the unit will automatically display the station’s
call sign and the RDS indicator will light in the Display
Window as well as indicators for the RDS services
programme (PS) if transmitted by the station.
RDS Display
The RDS system is capable of transmitting a wide
variety of information in addition to the initial call sign
that appears when a station is first tuned. In normal
RDS operation the display will indicate the station
name. Pressing RDS on the remote control enables
you to show the station name.
Note
If the RDS services programme (PS) is not being
transmitted, the Display Window will show a PS
NONE message.