LG LH-CX245 - Manual (Page 12)

12
Progressive Scan (ColorStream ® pro) connection
Connect the EURO AV1 AUDIO/VIDEO socket on the
DVD/VCR Combi receiver to the COMPONENT
VIDEO INPUT(Y Pb Pr) jacks on the TV using the
SCART to RCA cable (Optional).
If your television is a high-definition or “digital
ready” television, you may take advantage of the
DVD/VCR Combi receiver progressive scan output
for the highest video resolution possible.
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD/VCR Combi
receiver.
Notes:
• Set the Progressive Mode to “On” on the setup
menu for progressive signal, see page 24.
• Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that “NO DISC” is displayed on the display
window.
2) Press STOP and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
• Progressive scan does not work with the analog
video connections (yellow VIDEO OUT jack).
Caution:
You must set the TV Output Select option on the
setup menu to use Y Pb Pr or RGB signal from the
EURO AV1 AUDIO/VIDEO socket.
(See “TV Output Select” on page 24.)
SCART INPUT
Y Pb Pr
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
VIDEO
INPUT
S-VIDEO
INPUT
Rear of TV
Rear of DVD/VCR Combi receiver
Pr(R) Pb(B) Y(G)