Hi-fi stereo sound system, Wide screen compatibility 16:9, Operation – LG LH-CX245 User Manual
Page 43
Operation
43
Hi-Fi Stereo Sound System
Your DVD/VCR Combi receiver will record and play-
back Hi-Fi stereo sound. In addition it has a stereo
NICAM digital stereo sound decoder. This allows you
to record and playback the sound in several different
ways. Video cassettes recorded on your DVD/VCR
Combi receiver will have a normal mono audio track
and two VHS Hi-Fi stereo audio tracks. These stereo
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
audio system, video disc or another Hi-Fi VCR.
1. Your DVD/VCR Combi receiver’s NICAM digital
sound decoder allows you to enjoy broadcasts
with NICAM sound, as well as standard stereo,
bilingual and mono sound. The particular type of
sound received or that recorded will be briefly dis-
played on the TV screen for a couple of seconds:
STEREO NICAM
Sound is automatically recorded on the Hi-Fi
stereo and mono tracks of the video tape.
BIL NICAM
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left)
will be recorded on the mono track of the video
tape.
MONO
The sound is recorded on the Hi-Fi tracks and the
mono track of the video tape without any separation.
2. Press AUDIO repeatedly until the desired audio
mode appears.
3. The choice is STEREO, LEFT, RIGHT and
MONO. In BIL NICAM playback the primary lan-
guage is output onthe left channel and the sec-
ondary channel is output simultaneously from the
right channel when audio output is set to
STEREO.
The primary language willbe output from both
channels when the audio setting is MONO.
Please note that when adjusting the tracking
control Hi-Fi stereo sound may revert to MONO.
Wide Screen Compatibility 16:9
Your DVD/VCR Combi receiver can record and play
back wide screen aspect ratio programmes (16:9). To
record a wide screen format programme successfully
the correct type of wide screen signal must be broad-
cast by the TV station.
1. Switch on your VCR.
Press
i
.
Press
F
or
G
to select 16:9/4:3.
Press OK.
2. Press
D
or
E
repeatedly to select: AUTO, 4:3 or
16:9.
AUTO:
Automatically plays back Wide-Screen
programmes as Wide-Screen and Normal
programmes as normal.
4:3
Only for playing back and recording Normal format
recordings (4:3).
16:9:
Only for playing back and recording Wide-Screen
format recordings (16:9).
3. Press
i
to remove the menus from the TV screen.
To enjoy Wide-Screen playback you must
connect your DVD/VCR Combi receiver to the TV
using a SCART cable.
REC
i
Pr-12
ACMS
PSET
R
1
2
TIME
DATE
OSD
ON
OFF
OSD
f
16:9
4:3
16:9
4:3
OPR
SYS-
TEM
Dr.
VCR
NIC
AUTO
4:3
16:9
REC
i
Pr-12
ACMS
PSET
R
1
2
TIME
DATE
OSD
ON
OFF
OSD
f
16:9
4:3
16:9
4:3
OPR
SYS-
TEM
Dr.
VCR
NIC
AUTO
4:3
16:9
REC
Pr-12
ACMS
PSET
R
1
2
TIME
DATE
SYS-
TEM
OSD
ON
OFF
OSD
f
16:9
4:3
16:9
4:3
Dr.
VCR
OPR
OK
i
NIC