LG RD-JT30 User Manual
Dlp projector, Features
This manual is related to the following products:
Table of contents
Document Outline
- DLP Projector
- Thank you for purchasing the DLP Projector.
- Please read this user’s guide to ensure correct use of the device. Save this user’s guide for fut...
- This DLP Projector can display various computer signals and NTSC/PAL/SECAM video signals.
- Copyright
- Disclaimer
- Introduction
- 1. Read this user’s guide before you operate your projector and save it for future reference.
- 2. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately...
- 3. Never replace the lamp assembly or any electronic components unless the projector is unplugged.
- 4. To reduce the risk of electric shock, do not disassemble this appliance. Take it to a qualifie...
- 5. Do not place this product on an unstable cart, stand, or table. The product may fall, sustaini...
- 6. Do not touch the top cover when the projector is under operation.
- 7. The projector must be packaged into a carry bag while moving to another place for operation.
- The Projector is shipped with the cables required for connection to standard PC or laptop compute...
- The indicator shows green for a normal state. When the projector is operated improperly, it shows...
- Press the POWER key to turn the projector on or off.
- Automatically determines the best picture settings for current received signals. (PC Mode Only)
- Selects signal sources from among PC, Video, S-Video and YPBPR.
- Selects to display an entirely blue, black, green or LG logo screen.
- The projector is equipped with 1 quick-release adjuster foot. Push the button to adjust its tilt ...
- Note: The adjuster can only bear the weight of the projector itself . Please do not place any add...
- The projector integrates high-performance optical engine projection and a user- friendly design t...
- The projector offers the following features:
- Note: The brightness of the projected image will vary depending on the ambient lighting condition...
- The remote control sensors are located in the front/ back of the projector.
- Press and open the battery compartment lid in the direction.
- Installation
- Place the projector at the required distance from the screen according to the desired picture siz...
- L Projection Distance
- HDTV description
- The projector is capable of displaying various High Definition TV display modes. Some of these so...
- Most of these sources will provide an analog component video output, a standard VGA output, or a ...
- The projector is capable of accepting HDTV data through a YPBPR connector. Use a HDTV cable that ...
- The following standards are supported in the HDTV function:
- Please refer to "Menu System" on page 14 for information on the HDTV (YPBPR) OSD selections.
- Connecting to Various Equipment
- Operation
- 1. Plug the power cord into a wall socket. Open the front Door to Power ON.
- 2. When plugging-in, the ORANGE Leds light. Press the Power button to turn on the projector. Then...
- 3. Switch on all connected equipment.
- Keystoning refers to the situation where the projected image is noticeably wider at either the to...
- In some cases, you may need to optimize the picture quality. To do this, press the AUTO key on th...
- *This function is available only in PC mode.
- When several input sources are available, press the SOURCE key to make a selection from the contr...
- Press Menu for the main menu, and then press Joystick to select a sub-menu. Press ENTER again to ...
- Default
- Projects images when the projector is 180 degrees horizontally rotated.
- Default
- Projects images when the projector is 180 degrees vertically rotated.
- This sub-menu only works in PC mode.
- * After the projector is turned off, there is a 90-second cooling period before the projector can...
- Maintenance
- Troubleshooting
- Specifications
- Technical Specifications
- Product name
- Personal Projector
- Model name
- RD-JT30 1024X768 XGA
- RD-JT31 800X600 SVGA
- Display system
- 1-CHIP DMD
- Lens F/Number
- F/2.4
- Lamp
- 150W NSH lamp
- Electrical
- Power supply
- AC100 ~ 240V, 3A, 50/60 Hz (Automatic)
- Power consumption
- 250 W (Max)
- Dimensions
- 248 mm (W) x 59 mm (H) x 170 mm (D)
- Operating temperature range
- 5˚C ~ 35˚C
- Weight
- 3 lbs (1.7 Kg)
- Computer input
- RGB input (HDTV: YPBPR)
- D-sub 15-pin (female)
- Video signal input
- S-VIDEO
- Mini DIN 4-pin port x1
- VIDEO
- RCA jack x1
- Output
- USB mouse connector
- A/B series x1
- Resolution
- H Sync (kHz)
- V Sync (Hz)
- Remark
- 640x350
- 31.5
- 70.1
- 640x400
- 37.9
- 85.1
- VESA
- 720x400
- 31.5
- 70.0
- 720x400
- 37.9
- 85.1
- VESA
- 640x480
- 31.5
- 60.0
- VESA
- 640x480
- 35.0
- 66.7
- Macintosh
- 640x480
- 37.9
- 72.8
- VESA
- 640x480
- 43.3
- 85.0
- VESA
- 800x600
- 35.2
- 56.3
- VESA
- 800x600
- 37.9
- 60.3
- VESA
- 800x600
- 48.1
- 72.2
- VESA
- 800x600
- 46.9
- 75.0
- VESA
- 800x600
- 53.7
- 85.1
- VESA
- 832x624
- 49.7
- 74.5
- Macintosh
- 1024x768
- 48.4
- 60.0
- VESA
- 1024x768
- 56.5
- 70.1
- VESA
- 1024x768
- 60.0
- 75.0
- VESA
- 1024x768
- 68.7
- 85.0
- VESA
- 1280x1024
- 64.0
- 60.0
- VESA
- Technical Specifications
- Dimensions