Lindy 25021 User Manual

Page 8

PRODUCT SPECIFICATIONS

Models

Twenty-Four (24) ports 100/10Mbps Fast Ethernet Switch
(For 13 inches and 19 inches width)

Standards

10BASE-T IEEE 802.3
100BASE-TX IEEE 802.3u

Ports

Twenty-four (24) 100BASE-TX

Media Support

10BASE-T Category 3, 4 or 5 TP
100BASE-TX Category 5 TP

Bandwidth

100BASE-TX 200/100/20/10Mbps

Forwarding /
Filtering Rate

148,810 packets/second per port @ 100Mbps, max.
14,881 packets/second per port @ 10Mbps, max.

Latency

sec @100Mbps, minimum

sec @ 10Mbps, minimum

MAC Addresses

8K six (6)-bytes entries maximum, self-learning

Buffer Memory

2.5Mb

Duplex Modes

Auto-Negotiation

Crossover

All the TP ports support Auto-MDIX function

LED Indicators

One (1) for Power
One (1) per port for Link / ACT
One (1) per port for Full-Duplex /Collision

Power Supply

Full range Auto-Switching
Input voltage: 100 ~ 240 +/-10% VAC/ 50 ~ 60 Hz

Power Consumption 21.5 watt max

Environment

Operating Temp: 0

~ 45

C (32

~ 113

Storage Temp: -20

~ 70

C (-4

~ 158

Humidity: 10% ~ 90% non-condensing

Certifications

FCC Class A
CE Mark

For 19 inches width:
442x184x44mm(17.40x7.24x1.73inches)

Dimensions

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to

Part 15 of FCC Rules, which are designed to provide reasonable protection against electromagnetic interference

in a commercial environment.

Changes or modifications to the equipment not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

CE MARK WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.