Lindy 25021 User Manual
Page 5
5
3
INSTALLATION
The Switch is "Plug & Play". It does NOT require software configuration. Users can immediately use any of the features of this
product simply by attaching the cables and turning on the power.
3.1
To locate the switch on a desktop
ƍ
Attach the four (4) rubber feet included in the product package to the bottom of the Switch, one in each corner.
ƍ
Place the Switch on a clean, flat desk or tabletop close to a power outlet.
ƍ
Plug in all network connections and the power cord.
ƍ
Turn the power switch to "On".
3.2
Rackmount placement
ƍ
Attach one (1) rackmounting bracket on each side of the Switch front panel and secure each bracket with the provided
screws.
ƍ
Use the other provided screws to secure each Switch to the rack.
Use the other provided screws to secure each Hub to the rack.