2 external scsi bus connections, External scsi bus connections, Internal scsi devices chained together – LSI 20860 User Manual

Page 17: Figure 1.3

Text mode
Original mode

Connecting SCSI Devices

1-9

Figure 1.3

Internal SCSI Devices Chained Together

1.3.2 External SCSI Bus Connections

This section provides step-by-step instructions about making external
SCSI bus connections.

Step 1.

To connect external SCSI devices to the LSI20860, plug the
50-pin connector on one end of a shielded SCSI cable into the
host adapter SCSI connector J3.

This connector is bracketed to the back panel of your computer.

Figure 1.4

shows how this connection is made.