Lowrance electronic LMF-400 - Manual (Page 42)

40
Reset Values:
1. Press
MENU , highlight S
YSTEM
S
ETUP
and press ENTER .
2. Scroll down to R ESET V ALUES
and press ENTER . The following message
will appear: Press Enter to reset all values.
3. Press ENTER to reset the values.
NOTE:
Resetting Values will not clear Engine/Tank configuration or the
settings of EP sensors previously calibrated or configured.
System Information
The system information screen provides information about the version
and build of the software in your LMF-400.
1. To access system information, select
S YSTEM I NFO
from the System
Setup menu and press ENTER . The system information will be
displayed on the screen.
NOTE:
The System Setup menu for all three analog gauges feature Speed
Range and Pressure Range.
Speed Range
1. To access the Speed Range menu, press
MENU when a single, dual or
quad analog page is on the main display.
2. Scroll down to S
YSTEM
S
ETUP
and press ENTER .
3. Select Speed Range and press ENTER . The Speed Range menu has
three options: 0-40, 0-80 and 0-120.
4. Choose the desired range and press ENTER , which will take you back
to the main display.
Pressure Range
1. To access the Pressure Range menu, press Menu when a single, dual
or quad analog page is on the main display.
2. Scroll down to S YSTEM S ETUP
and press ENTER .
3. Select Pressure Range and press ENTER , which will launch the
Pressure Range menu, which five options: Engine Water Pressure,
Engine Oil Pressure, Fuel Pressure, Engine Boost Pressure and
Transmission Oil Pressure.
4. Choose one of the options and press
ENTER . A menu will appear with
the following PSI ranges: 0-15 psi, 0-30 psi, 0-60, 0-80 psi and 0-100 psi.
5. Select the desired range and press
ENTER , which will take you back
to the main display.