Lowrance electronic LMF-400 - Manual (Page 33)

31
Section 5: Advanced Operation
Customizing Pages
In this section, we're going to take a look at how each of the pages can
be customized.
NOTE:
In order to access a page-specific menu make sure the desired page
is on the display when you press the menu button. The page menus
have a lot of similarities, but many have specific menu categories
that only will appear on the basic menu if accessed while that page
is on the main screen. For example, if you wanted to access the Fuel
Manager menu, then you must scroll through the pages until the
Fuel Manager page is displayed on the screen before pressing
MENU .
Basic menu with Customize highlighted.
Single Analog
A single gauge display, the Single Analog page may be customized to
monitor any of the following: Alt Voltage, Battery Voltage, Engine
Temp, Atmospheric Pressure, Temperature, Fluid Level, PaddleWheel
Speed, Pitot Speed, GPS Speed and Tachometer.
To customize the Single Analog page:
1. Scroll through the pages set for display by pushing the ENTER or EXIT
key.
2. Once the Single Analog page is displayed, press MENU , select
C USTOMIZE
and press ENTER .
3. Scroll through the device list and highlight the category you want to
monitor, then press
ENTER . The information you selected will be
displayed on the screen.