Life Fitness X7 User Manual

Page 14

Text mode
Original mode

Step 3

Assemble the Console Upright

Parts: Hardware Bag #2

(3, 74mm Long Silver Hex Head Bolts)
(1, 20mm Long Silver Hex Head Bolt)

Tools: 17mm Socket Wrench
The console upright tube (C) is pre-assembled with one bolt so that you can simply lift the upright into place by
pivoting upward. Hold the upright in place and install three 74mm Long Hex Head Bolts (2) into the side of the
main bracket (D). Install one 20mm Long Hex Head Bolt (3) into the front of the bracket.
CAUTION: Do not pinch wires when assembling
the upright.

Step 4

Connect Base Wiring

Parts: None
Connect the two wires (E) at the base of the

upright.