Linksys WUSBF54G - Manual (Page 34)

28 Chapter 5: Using the Wireless Network Monitor
Creating a New Profile
Wireless-G USB Network Adapter with Wi-Fi Finder
Setting Up the Adapter with Manual Setup
If your network is not listed among the available networks, click Manual Setup on the Available Wireless
Network screen to set up the adapter manually.
1. After clicking Manual Setup, the Network Settings screen will appear. If your network has a router or other
DHCP server, click the radio button next to Obtain network settings automatically (DHCP).
If your network does not have a Router or DHCP server, click the radio button next to Specify network
settings. Enter an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your
network. You must specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default
Gateway and DNS addresses, leave these fields empty.
IP Address - This IP Address must be unique to your network.
Subnet Mask - The Adapter’s Subnet Mask must be the same as your wired network’s Subnet Mask.
Default Gateway - Enter the IP address of your network’s Gateway here.
DNS 1 and DNS 2 - Enter the DNS address of your wired Ethernet network here.
Click Next to continue, or click Back to return to the Available Wireless Network screen.
Figure 5-17: Available Wireless Network
Figure 5-18: Network Settings