LG LSC27990TT - Manual (Page 12)

12
Installation
Antenna or Cable Service without a Cable Box Connections
For optimum picture quality, adjust antenna direction if needed.
Antenna Connection
External Equipment Connections
wall antenna
socket
VHF antenna
UHF antenna
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Be careful not to bend the bronze wire
when connecting the antenna.
Bronze Wire
Main Power
Antenna jack
Bronze Wire
RF coaxial wire (75 ohm)
Turn clockwise to tighten.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Typical
Antennas
Direct
Connection
VCR
Connection Panel
Cable Box Connection Panel
Connection
1. Connect the audio/video out sockets of the
VCR to audio/video in sockets of the set.
2. Press the TV/AV/RADIO button to select AV.
3. Press the PLAY button on the VCR.
The VCR playback picture
appears on the screen.
Connection
1. Use the TV/AV/RADIO button on
the remote control to select TV.
2. Tune to cable service provided
channels using the cable box.
- After subscribing to a local cable TV service and installing a converter, you can
watch cable TV programming.
- For further cable TV information, contact a local cable service provider.
In a poor signal area to improve picture quality,
purchase and install a signal amplifier.
If the antenna is not installed properly, contact
your dealer for assistance.
Connecting
a VCR / DVD
Cable TV
Connections
•
If you have a mono VCR, connect the audio cable from the VCR to the AUDIO
L/MONO socket of the set.
NOTE