Lowrance electronic LMS-334c iGPS - Manual (Page 185)

177
A POI selected by the cursor (left). POI information screen (right).
Find Interstate Highway Exits
1. From the Map Page, press MENU |
↓ to
H IGHWAY E XITS
| ENT , which will
launch the Find Exit menu.
The Find Exit menu (left) Find By Name menu (right).
2. Select a highway name by pressing ENT , which will bring up the Find
By Name menu. There are two highway search options: A. You can
spell out the highway name in the top selection box. Press
↑ ↓ to change
the first letter, then press
→ to move the cursor to the next letter and
repeat until the name is correct, then press ENT | ENT . B. Or jump down
to the lower selection list by pressing ENT , then press
↓ ↑ to select a
highway from the list and press ENT .
3. Once a highway has been chosen, select an exit. Press
↓ to switch to
the Exit List, then press
↓ ↑ to highlight the desired exit and press
ENT .
4. In the Exit Information screen you have two choices. A. Press ENT to
navigate or go to the exit. B. Press
→|
ENT to find the exit on the map.