Lowrance electronic LMS-334c iGPS - Manual (Page 184)

176
There are two options: A. You can spell out the name in the top selec-
tion box. Press
↑ ↓ to change the first letter, then press → to move the
cursor to the next letter and repeat until the name is correct, then
press
ENT | ENT . B. Jump down to the lower selection list by pressing
ENT , then press
↓ ↑ to select a street name from the list and press
ENT .
The street name you selected is now in the street field.
The Finds Streets menu (left). The Find Street by Name menu (right).
4. To enter a city name, press
↓ to
C
ITY
| ENT . You will be asked if you
want to find streets only within a particular city. This option is de-
signed so you can limit an address search to a single city if necessary.
If you select yes, there are two options: A. You can spell out the city
name in the top selection box. Press
↑ ↓ to change the first letter, then
press
→ to move the cursor to the next letter and repeat until the name
is correct, then press ENT | ENT . B. Jump down to the lower selection list
by pressing ENT , then press
↓ ↑ to select a city name from the list, then
press ENT . The city name you selected is now in the city field.
NOTE:
We recommend you do not enter a city name unless the list you are
working with is too large when searching without a city. This unit
can actually search quicker when you do not enter a city.
Find Any Item Selected by Map Cursor
On the Map Page, with a POI or map feature selected by the cursor,
press
WPT . The waypoint information window will appear with Go To
Waypoint highlighted.
NOTE:
Since Go To Waypoint is highlighted, you can navigate to the se-
lected POI by pressing
ENT | EXIT .