Advanced configuration – Linksys WUSB600N (EU) User Manual
Page 25
Chapter 3
Advanced Configuration
22
Dual-Band Wireless-N USB Network Adapter
EAP-TLS
WPA2 Enterprise - EAP-TLS
If you selected EAP-TLS, configure the following:
Login Name
Enter the login name of your wireless
network.
Server Name
Enter the name of the authentication server
(this is optional).
Certificate
Select the certificate you installed to
authenticate you on your wireless network.
Click
Next to continue, or click Back to return to the
previous screen.
PEAP
WPA2 Enterprise - PEAP
If you selected PEAP, configure the following:
Login Name
Enter the login name of your wireless
network.
Password
Enter the password of your wireless network.
Server Name
Enter the name of the authentication server
(this is optional).
Certificate
Select the certificate you installed to
authenticate you on your wireless network. If you want to
use any certificate, keep the default,
Trust Any.
Inner Authen.
Select the authentication method used
inside the PEAP tunnel.
Click
Next to continue, or click Back to return to the
previous screen.
RADIUS
RADIUS features use of a RADIUS server. (This should only
be used when a RADIUS server is connected to the router.)
RADIUS offers two authentication types: EAP-TLS and
PEAP.
Authentication
Select the authentication method your
network is using,
EAP-TLS or PEAP.
EAP-TLS
RADIUS - EAP-TLS
If you selected EAP-TLS, configure the following:
Login Name
Enter the login name of your wireless
network.
Server Name
Enter the name of the authentication server
(this is optional).
Certificate
Select the certificate you installed to
authenticate you on your wireless network.
Click
Next to continue, or click Back to return to the
previous screen.