Linksys WUSB600N (EU) - Manual (Page 13)

Chapter 3
Advanced Configuration
10 Dual-Band Wireless-N USB Network Adapter
On the Adapter’s PIN number screen, click 3. Next.
Enter the PIN Number
The Adapter connects to the network. 4.
Connecting to the Network
Click 5. Print to print out your wireless network settings.
Then click Finish to return to the Status screen, or click
Exit to exit the Monitor.
Congratulations
Congratulations! The Adapter is connected to
the network.
Enter Key Manually
Proceed to the appropriate section, “Wireless Security
Disabled” or “Wireless Security Enabled”.
Wireless Security Disabled
If you connect to a network whose wireless security is
disabled, then you will view this screen:
Click Connect Anyway
Click 1. Connect Anyway.
Click 2. Finish.
Congratulations
Congratulations! The Adapter is connected to
the network.