Lanier 5415 - Manual (Page 9)

Turning the Copier ON
Making Copies 1 - 1
Turning the Copier ON
The Main Power switch turns on the power to the copier. The Main Power switch is
located on the right-hand side of the copier.
1
To turn the copier on, press the switch to
the (I) ON position.
•
When the copier is turned ON, it
automatically enters a warm-up
mode.
•
After about 30 seconds, the green
Ready Indicator in the Start key turns
ON.
•
When the copier comes to its Ready condition, it automatically goes into the
Initial Mode.
2
To turn the copier off, press the switch to the (O) OFF position.
Note: If you turn off the Main Power switch while the copier is in the sleep mode,
the green indicator light in the Start switch will stay ON for a short time.
Note: The Function Mode will change to Sort if the machine is equipped with an
Auto Document Feeder and Expansion Memory.
Note: The Initial Mode can be changed. See “User’s Choice Functions” on page
5-4.
Initial Mode Settings
Copy Quantity 1
Paper Drawer Paper Tray
Zoom Ratio 100%
Exposure Mode Auto
Function Mode Non-Sort F1