Lanier 5415 - Manual (Page 23)

Placing the Original Document
Copier Functions 3 - 1
Placing the Original Document
When using the Automatic Document Feeder
With the Automatic Document Feeder, originals placed into the Document Feed Tray are
fed in one sheet at a time, copied, then fed out. Please follow the instructions provided
when using this device. Failure to follow these instructions may cause a misfeed, damage
to the original or other complications.
Originals should follow these standards
•
Type of Paper:Plain paper(50–110 g/m 2 )
•
Paper Size: LT - ST(A4L–A5L)
Originals that are not compatible with the Automatic Document Feeder
•
Typing paper, paraffin paper and other thin paper types.
•
Thick paper.
•
Sizes that are larger than LT(A4) or smaller than ST (A5).
•
OHP transparencies, tracing paper or other transparent paper types.
•
Wrinkled, folded, curled or torn originals.
•
Originals that are stapled or are attached with paper clips.
•
Carbon paper or paper with coated surfaces.
•
To produce copies from an original document described above, place it on the
Original Glass.