Lenoxx Electronics SL-328 - Manual (Page 4)

POWERING UP
TIP
If the plug of the AC power cord does not match your outlet, do not force it.
Reverse it and try again. The plug is polarized and only fits one way into the wall
outlet.
3
To a wall outlet
NOTE: One blade of
plug and outlet
is wider.
Carefully unwind and stretch out the speaker wire on the back of each speaker
box and plug the right plug into Speaker Jack marked “ R ”, and the left plug into
Speaker Jack marked “ L ”.
Plug the AC POWER CORD into a 120V, 60Hz wall outlet. The AC POWER STANDBY
INDICATOR will be on. This indicator shows you that the set & outlet are OK.
CONNECTING THE SPEAKERS AND ANTENNAS
Unwind the FM ANTENNA (thin wire) at the back of the set and straighten it out for FM
reception; for AM reception, please use the AM LOOP ANTENNA and plug its wire
into the AM ANTENNA SOCKET at the back of the set, then position the AM ANTENNA
on the top of the set for the best AM reception.
FM ANTENNA
AC CORD
AM LOOP
ANTENNA
AC POWER
STANDBY
INDICATOR
AM ANTENNA
SOCKET
IB-SL328-SY-WM-E-120801