Lincoln Electric IM355-C LN-9 GMA - Manual (Page 57)

TROUbLESHOOTING
E-3 E-3
LN-9 GMA and LN-9F GMA Wire Feeder
PRObLEMS
(SYMPTOMS)
Gun trigger will not feed wire. Digital
meter is not lit.
POSSIbLE AREAS OF
MISADJUSTMENT(S)
1. Check to see if the circuit
breaker is tripped. Reset the
circuit breaker. See the topic
"Circuit
Breaker" in the
Operation section.
2. Check to see if the power supply
fuse is blown. Replace the fuse.
See the topic "Power Supply
Fuse" in the Operation section.
3. Check to see if there is 115 VAC
supply from the power source.
Check that power source is "on".
If so, check the power source AC
fuse.
4. The control cable may be faulty.
Check or replace.
RECOMMENDED
COURSE OF ACTION
If all recommended possible
areas of misadjustment have
been checked and the problem
persists, contact your local
Lincoln Authorized Field Service
Facility.
If for any reason you do not understand the test procedures or are unable to perform the necessary tests/repairs
safely, contact your local authorized field service facility before you proceed.
WIRE FEEDING PRObLEMS
CAUTION
Observe Safety Guidelines
detailed in the beginning of this manual.
TROUbLESHOOTING GUIDE