Using the 3/8" wrench, remove the two
screws from the top front of the roof assem-
bly and the two screws from the sides of the
control box. Carefully lower the front control
panel. See Figure F.2.

With 3/8" wrench, remove the right rear
panel and the right and left front panels.
See Figure F.1.

With the 1/2" wrench, remove the exhaust
pipe rain cap.

Remove the fuel tank cap, gasket, and the
lift bail cover seal.

With the help of an assistant, carefully
remove the roof. The door assembly
remains attached to the roof. Replace the
fuel cap.