LG D2342P - Manual (Page 11)

11
ENG
ENGLISH
USING THE MONITOR SET
y y Using the computer by connecting the two
units, computer connect the signal cable
(D-SUB/DVI-D/HDMI) respectively and use.
y y This is a simplified representation of the rear
view.
y y This rear view represents a general model;
your display may differ from the view as
shown.
y y If you turn the Monitor set on when the set
becomes cold, the screen may flicker. This
is normal.
y y Some red, green, or blue spots may appear
on the screen. This is normal.
y y ‘ Self Image Setting Function’? This
function provides the user with optimal
display settings.When the user connects
the monitor for the first time, this function
automatically adjusts the display to optimal
settings for individual input signals.(Only
Analog Mode)
y y ‘AUTO’ Function? When you encounter
problems such as blurry screen, blurred
letters, screen flicker or tilted screen while
using the device or after changing screen
resolution, press the AUTO function button to
improve resolution.(Only Analog Mode)
NOTE NOTE
y y Connect the signal
input cable and tighten
it by turning the screws
clockwise.
y y Do not press the screen with your finger for
a long time as this may result in temporary
distortion on the screen.
y y Avoid displaying a fixed image on the
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
CAUTION
Self Image Setting Function
Press the power button on the front panel to turn
the power on. When monitor power is
turned on, the
'Self Image Setting Function' is
executed automatically. (Only Analog Mode)