Lowrance electronic X86 TX - Manual (Page 23)

19
In-dash mounting template for X86 DS & X86 TX, showing dimensions.
The preceding figure is not printed to scale. A scaled template is avail-
able for free download from our web site, www.lowrance.com.
Bracket Installation
Mount the unit in any convenient location, provided there is clearance
when it’s tilted for the best viewing angle. You should also make sure
there is enough room behind the unit to attach the power/transducer
cable.
Holes in the bracket’s base allow wood screw or through-bolt mounting.
You may need to place a piece of plywood on the back side of thin pan-
els to reinforce the panel and secure the mounting hardware.
Millimeters
[Inches]
ALWAYS VERIFY DIMENSIONS
In-Dash
Template
R 7.9
[0.31]
Top
113.5
[4.46]
146.5
[5.76]