Authorization code, To make a call with an authorization code, Billing codes – Linksys SPA941/SPA942 User Manual
Page 6: To enter a billing code for a call, Broadcast paging, Call block (selective), To configure your call block list, Call forward (all calls), To enable call forwarding, To disable call forwarding
Authorization Code
Authorization codes enable you to
override any call restrictions on the
phone when you place a call.
To make a call with an Authorization
Code
•
Lift the handset
•
Press 9 (or the appropriate access
code if different)
•
Press ## for SIP phones
•
Enter your authorization code
•
When you enter the correct code,
you will hear a dial tone.
•
Dial the phone number
Billing Codes
Billing Codes enable you to track calls
by associating a billing code with each
call.
To enter a billing code for a call:
•
During a call, press *02
•
Enter the billing code and the # sign
If you enter multiple billing codes during a call,
only the last billing code will be recorded.
Broadcast Paging
Broadcast Paging broadcasts an
announcement to all members of your
paging group.
To make a Broadcast Page:
•
Dial the broadcast paging number
•
After the tone, make your
announcement
•
Hang up
To receive a Broadcast Page:
•
Your phone will ring with a priority
ring tone
•
Lift the handset or activate the
speakerphone
NOTE: Your phone must be idle to
receive a Broadcast Page.
Call Block (Selective)
Selective Call Rejection lets you
program your phone to reject calls from
a list of telephone numbers.
To configure your Call Block List
•
Dial *60
•
Follow the voice prompts to enable
or disable the feature, or add the
last caller to the blocked list, and
add, delete, or list numbers to be
blocked.
Call Forward (All Calls)
Call Forward (All Calls) lets you forward
incoming calls to another number.
To enable Call Forwarding
•
Dial 72*
•
Enter the phone number for the
forwarding destination followed by #
•
Press # to confirm followed by 2 to
exit
•
Hang up
To disable Call Forwarding
•
Dial 73*
•
After hearing the verification, hang
up
Call Forward (Busy)
Call Forward (Busy) forwards calls to
another number when you are already
on a call.
To enable Call Forward (Busy)
•
Dial 76*
•
Enter the phone number for the
forwarding destination followed by #
•
Press # to confirm followed by 2 to
exit
•
Hang up
To cancel Call Forward (Busy)
•
Dial 77*
•
Hang up
FeatureTel Linksys IP Phone User Guide
Page 6