Life Fitness Lat Pulldown/Low Row 8210 - Manual (Page 4)

STEP 1:
FIGURE 1
• LOOSELY assemble the BENCH FRAME (1) to the TOWER (6) using two 1/2 X 4” BOLTS (18),
two 1/2” WASHERS (24), and two 1/2” LOCK NUTS (26) as shown in FIGURE 1.
6
24 26
18 1/2 X 4”
1
4
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2
38
• If the machine is not going to be bolted to the floor, insert two 5/8” CAP PLUGS (38) into the TOWER
(6) as shown in FIGURE 1.