Linksys WAP54GX - Manual (Page 28)

22 Chapter 6: Configuring the Wireless-G Access Point with SRX
The Setup - Network Setup Tab
Wireless-G Access Point with SRX
Select Static IP if you want to assign a static or fixed IP address to the Access Point. Then complete the
following:
IP Address. The IP address must be unique to your network. We suggest you use the default IP address of
192.168.1.245.
Subnet Mask. The Subnet Mask must be the same as that set on your Ethernet network.
Default Gateway. Enter the IP address of your network’s gateway. The gateway is the device that enables
communication between your computers and the Internet. In most cases, your router acts as your gateway.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Click Help for more information.
Figure 6-3: Setup - Static IP Screen
static ip address: a fixed address assigned to a computer or
device that is connected to a network.