beautypg.com

Instrument cluster – Lincoln 2011 Navigator User Manual

Page 23

background image

2. Press and hold RESET for two seconds and release to reset the oil life
to 100%.

Note: To change oil life 100% value to another value, proceed to Step 3.

3. Once “OIL LIFE SET TO XXX%” is displayed, release and press
RESET to change the Oil Life Start Value. Each release and press will
reduce the value by 10%.

UNITS

Displays the current units English or Metric.

Press the RESET button to change from English to Metric.

AUTOLAMP (SEC)

This feature keeps your headlights on for up to three minutes after the
ignition is switched off.

Press the RESET button to select the new Autolamp delay values of 0,
10, 20, 30, 60, 90, 120 or 180 seconds.

AUTOLOCK

This feature automatically locks all vehicle doors when the vehicle is
shifted into any gear, putting the vehicle in motion.

Press the RESET button to turn autolock on or off.

AUTOUNLOCK

This feature automatically unlocks all vehicle doors when the driver’s
door is opened within 10 minutes of the ignition being turned off.

Press the RESET button to turn autounlock on or off.

RUNNING BOARDS (if equipped)

This feature automatically deploys the side running boards for easy
entry/exit from the vehicle or for cleaning.

Press the RESET button to select the running boards setting as follows:

•AUTO: the running boards will automatically deploy when a door is
opened and automatically retract when the door is closed,

• OUT: the running boards will remain deployed regardless of the doors
being open/closed. This setting can be used when washing the vehicle, or
accessing the roof rack. The running boards will stow and enter AUTO
mode when the vehicle speed exceeds 5 mph (8 km/h),

• OFF: the running boards will remain IN regardless of the doors being
open/closed.

Instrument Cluster

23

2011 Navigator (nav)
Owners Guide, 1st Printing
USA
(fus)