Lincoln 1998 Continental - Manual (Page 124)

Removing the jumper cables
1. Remove the jumper cables in
reverse order. Take the cable off the
alternator mounting brace stud (1)
first, followed by the cable on the
negative (-) booster battery terminal
(2).
2. Remove the cable from the
positive (+) terminal of the booster
battery (3) and then the discharged
battery (4).
3. After the disabled vehicle has
been started, allow it to idle for a
while so the engine can “relearn” its
idle conditions.
WRECKER TOWING
+
–
+
–
4
1
2
3
Roadside emergencies
124