La Crosse Technology WS-7034U-IT - Manual (Page 11)

11
first into all the remote temperature
sensors. Second install batteries into the
indoor temperature station and do not
press any buttons for ten minutes.
Transmission problems will arise if this
is not done correctly.
To view the temperature of a different
remote temperature sensor unit, press
and release the “SET/CH” button. A
shift from one number to the next should
be observed in the OUTDOOR LCD.
MOUNTING
Note: To achieve a true temperature
reading, avoid mounting in direct sunlight.
We recommend that you mount the remote
temperature sensor on a North-facing wall.
The sending range is 330ft; obstacles such as
walls, concrete, and large metal objects will
reduce the range. Place both units in their
desired location before permanently
mounting.