Lenoxx Electronics CD-110 - Manual (Page 9)

You can make a program of up to 16 tracks in the order you want them to be
played.
1. Rotate the FUNCTION switch to CD position.
2. Press the PROGRAM button. The letters “Pr” and
the PROGRAM lamp will flash.
3. Press or to select the tracks you want to
program in the order you want.
4. Press the PROGRAM button to confirm. The letters
“Pr” and the PROGRAM lamp will flash.
5. Repeat steps 3 and 4. You can program up to 16
tracks.
6. Press to start your programmed play. The
PROGRAM lamp will be steady on.
To check the order of tracks before play
Press the PROGRAM button, the programmed track number appears in the display
automatically.
To change the current program
Just create a new program following the programming procedure.
PROGRAM LAMP
To cancel Program Play
Press the STOP button twice and the PROGRAM lamp goes off.
P R O G .
8
SELECTING YOUR OWN MUSIC PLAYING ORDER
(Programmed Play)
NOTE: Programming is only done during stop mode.
PROGRAM
BUTTON
STOP
P R O G .
P LAY/
PA U S E
TRACK
PROGRAM
PROGRAM
P R O G .
P ROG .
P LAY/
PAU SE
TRACK
IB-CD110(SY)-WM-E-V1