Lenoxx Electronics CD-110 - Manual (Page 14)

TROUBLE SHOOTING
Problem Remedy
The power is not on.
•
Connect the AC power cord to a wall
outlet securely and make sure AC cord is
inserted properly in the back of the set.
•
Make sure the batteries are inserted
correctly and they are fresh.
There is no sound.
•
Make sure the FUNCTION switch is at the
right position as you want.
•
Adjust the volume.
•
Unplug the headphones when listening
through speakers.
“ ” appears in the display
even when a CD is inside.
•
Insert the CD with the label side up.
CD does not play.
•
Make sure that the CD compartment is
closed.
•
Place the CD with the label side up.
•
Clean the CD.
•
Take out the CD and leave the CD DOOR
open for about an hour to dry moisture
condensation.
•
Make sure the FUNCTION switch is in the
CD position.
•
Clean the CD, or replace it if the CD is
badly damaged.
•
Place the player in a location free from
vibration.
•
Check if your batteries are fresh.
(NOTE: Your batteries may have some life
in them, enough for radio use, but not
enough for CD play.
The sound is weak or has
poor quality.
•
Replace all the batteries with new ones if
they are weak, or bring the set near a
window, or rotate the set.
General
CD
player
Radio
The sound drops out.
13
IB-CD110(SY)-WM-E-V1