User manual english – Lindy Mini NAS Enclosure SATA & IDE 42808 User Manual
Page 8
User Manual
English
6
3. Password Change
In the Administration mode, you can choose your own password for entering the setup
mode. Now you are ready to connect the NAS Enclosure to your Network.
4. Connect the NAS Enclosure Via Ethernet.
Connect an Ethernet cable to the Ethernet port of your NAS Enclosure.
Connect the other end of the Ethernet cable to your Network Router.
Switch on your NAS Enclosure; it may take a few second for your network to recognise the
NAS Enclosure.
Please Note:
After changing the password you will be logged off and then be prompted to log in using
your new password.
Important Information:
Make sure that the computer you will be using to configure the NAS Enclosure is on the
same network (or same subnet) as the NAS Enclosure.
- 51131 (2 pages)
- CPU SWITCH LITE 32856 (32 pages)
- 51187 (2 pages)
- 70536 (11 pages)
- SD-CBALINEC-4E6I (4 pages)
- 42926 (2 pages)
- 52020 (27 pages)
- 42910 (2 pages)
- 70918 (9 pages)
- 70582 (3 pages)
- USB CF PEN READER 32899 (1 page)
- RS-422/485 (23 pages)
- 39405 (67 pages)
- 70584 (4 pages)
- 20697 (2 pages)
- 42985 (18 pages)
- USB to DVI-I Adapter 42883 (8 pages)
- FireWire 800 (2 pages)
- 20695 (2 pages)
- PCMCIA/CardBus Adapter Card 51103 (1 page)
- 51535 (4 pages)
- 32352 (70 pages)
- Wireless LAN Router (28 pages)
- 70548 (10 pages)
- 20965 (4 pages)
- 42960 (12 pages)
- 42616 (8 pages)
- 25130 (14 pages)
- 42782 (8 pages)
- Personal Server 32454 (39 pages)
- DCF-77 (2 pages)
- 42797 (3 pages)
- Wireless LAN - 11 PCMCIA Card (28 pages)
- 51143 (2 pages)
- 51185 (2 pages)
- 51080 (2 pages)
- 42980 (11 pages)
- 51072 (2 pages)
- 70570 (8 pages)
- 70531 (3 pages)
- Ethernet Powerline Adaptor 25131 (8 pages)
- USB to VGA Adapter 42983 (8 pages)
- 32407 (7 pages)
- 42891 (4 pages)