Lindy Mini NAS Enclosure SATA & IDE 42808 - Manual (Page 3)

User Manual English
1
Introduction
Thank you for purchasing the LINDY Mini NAS Enclosure. This enclosure has been designed to
add extra storage to your Mac Mini and your network, whilst complimenting the design of your
Mac Mini. The small footprint design allows it to be seated underneath a Mac Mini, but with its
Network and USB 2.0 interface, it can also be used with other suitably equipped Macs and PCs.
Features
For use with standard 3.5” SATA/IDE hard disks
USB 2.0 and RJ-45 interface
USB 2.0 interface is backwards compatible with USB 1.1 equipped computers
Connectors: 1 x USB 2.0 Type B Female; 1 x RJ-45 Female 10/100Mbps
Supports DHCP server, Samba server with hosting for 64 online clients
FTP server support for up to 5 FTP users at the same time
Password management provides secure access to the HDD and web management
Aluminium cover for heat dispersal
Low-noise internal fan
Stylish blue power LED
There are 4 different setup options:
As a DHCP Client:
If your NAS Enclosure operates under a built-in DHCP server router (e.g. Internet Sharing
Hub), it will obtain an IP address from the DHCP server automatically
As a DHCP Server:
If your operating environment does not support a DHCP server, the NAS Enclosure will
immediately act as a DHCP server and assign an IP address for installation
In a Static IP environment:
If your operating environment supports static IP addresses you will need to configure the
IP address for the NAS Enclosure to operate in a static IP environment.
USB 2.0 Mode:
Simply connect the USB 2.0 cable from the NAS enclosure to your PC and turn on the
power; the NAS Enclosure will simply become an external USB Hard Disk
Package Contents
Mini NAS Enclosure
Installation screws
2 foam feet
12V DC Power Adapter
1m, USB 2.0 cable
1m, Ethernet cable
LINDY User Manual
CD-ROM