Linksys WAP2000 - Manual (Page 22)

Chapter 5 Advanced Configuration
8 Wireless-G Access Point with Power Over Ethernet
Status > Wireless
The Wireless screen displays the Access Point’s current
status information for the wireless network(s).
Status > Wireless
MAC Address The MAC Address of the Access Point’s
wireless interfaces is displayed here.
Mode The Access Point’s wireless network mode is
displayed here.
SSID -4 The Access Point’s SSIDs that have been
configured are displayed here.
Channel The Access Point’s Channel setting for the SSID
is shown here.
VLAN Trunk The VLAN Trunk Status is displayed here.
Priority Setting The priority setting status is displayed
here.
SSID -4 Security Mode Displays the security mode
utilized for the appropriate SSID.
SSID -4 Priority Displays the priority of the SSID.
Help information is available on the right side of the
screen.
Status > System Performance
The System Performance screen displays the Access
Point’s status information for its current settings and data
transmissions.
Status > System Performance
Wired
Name This indicates that the statistics are for the wired
network, the LAN.
IP Address The Access Point’s local IP address is displayed
here.
MAC Address This shows the MAC Address of the Access
Point’s wired interface.
Connection This shows the status of the Access Point’s
connection for the wired network.
Packets Received This shows the number of packets
received.
Packets Sent This shows the number of packets sent.
Bytes Received This shows the number of bytes
received.
Bytes Sent This shows the number of bytes sent.
Error Packets Received This shows the number of error
packets received.
Drop Received Packets This shows the number of
packets being dropped after they were received.
Wireless
Name This indicates the wireless network/SSID to which
the statistics refer.
IP Address The Access Point’s local IP address is displayed
here.