Lucent Technologies Host-Based Controller Modem AT - Manual (Page 63)

Data Addendum Host-Based Controller Modem
June 15, 1998 AT Command Set
AT Commands for Homologation Testing and Debugging (continued)
Version 1.0 Lucent Technologies Inc. 63
Configuring for Different Countries
To configure for a specific country, execute the following AT commands:
AT%T19,0,country_code in HEX (refer to Table 2)
Verify with the ATI9 command (which displays the country name) that the right country has been configured.
Table 12. The Country Codes
Country Country_Code in HEX
USA 19
Australia 1
Belgium 2
Denmark 3
Finland 4
France 5
Germany 6
The Netherlands 7
Italy 8
New Zealand 9
Norway A
Spain B
Sweden C
Switzerland D
United Kingdom E
Austria F
Japan 10
People’s Republic of China 11
Korea 12
Malaysia 13
Singapore 14
Taiwan 15
Thailand 16
Indonesia 17
Portugal 18
Ireland 1A
Hong Kong 1B
Canada 1C
Mexico 1D
India 1E
Vietnam 1F
Philippines 20
Greece 21
Hungary 22
Turkey 23
South Africa 24