Lexicon MPX 550 - Manual (Page 40)

System Mode
MPX 550
3-5
Digital Output (Processed, Dry)
Selects the source for the digital output. When set to
Processed, the digital output is the same as the analog
outputs. Its mix level will reflect the current setting of the
Mix parameter. When set to Dry, the digital output is the
input. This setting is useful for recording dry tracks while
still providing processing at the analog outputs.
Mix Mode (Program, Global)
Controls the mix level that is applied when a new
program is loaded. Mix levels are stored with each
program. When Mix Mode is set to Program, the unit
applies the stored mix level of the selected program to
that program as it is loaded. When set to Global, the unit
ignores stored mix levels and applies the current mix
level to each program as it is loaded.
Bypass Mode (Dry, Full Mute, Input Mute)
Sets the function of Bypass. When set to Dry, the unit
sends only dry, unprocessed audio to the outputs. When
set to Full Mute, the unit mutes the outputs. When set to
Input Mute, the unit mutes the inputs only. Running
effects will continue their natural decay.
Program Load Mode (Bypass Dry, Full Mute)
Controls the processing of incoming audio signals during
program load. When set to Bypass Dry, the unit sends
only dry, unprocessed audio to the outputs. When set to
Full Mute, the unit mutes during program load.
Tempo Mode (Program, Global)
Controls the tempo setting that is applied when a new
program is loaded. A tempo setting is stored with each
program. When Tempo Mode is set to Program, the unit
applies the stored tempo setting of each program as it is
loaded. When set to Global, the unit applies the current
tempo setting to each program as it is loaded.
Compressor Mode (Program, Global)
Controls the compression settings that are applied when
a new program is loaded. Compression settings are
stored with each program. When Compressor Mode is
set to Program, the unit applies the stored setting of
each program as it is loaded. When set to Global, the
unit applies the current compression setting to each
program as it is loaded.