Land Pride AT2672 User Manual
Page 20
18
Section 4: Maintenance & Lubrication
AT2672 Grooming Mowers 310-302M
Land Pride
07/02/07
Gearbox
Unscrew top vent plug in gearbox to remove dipstick. Wipe
oil from dipstick and screw it back in without tightening.
Unscrew dipstick and check oil level mark. If low, fill
through top plug hole in gearbox with EP 80-90W oil until oil
reaches full mark on the dipstick. Reinstall vent plug with
dipstick and tighten.
Take your gearbox to a Land Pride dealer if it requires
service.
Type of Lubrication: Gear Lube EP 80-90W
Quantity = Fill until oil reaches full mark on dipstick.
IMPORTANT: Do not overfill! Level mower and wait
for gearbox oil to cool before checking. mower that
is not level or a gearbox with hot oil will not show
correct oil level on the dipstick.
23582
Do Not
Overfill
IMPORTANT: Your mower is shipped with the
gearbox vent plug with dipstick packaged in the
Operator’s Manual bag and should have been
installed in the gearbox by your Land Pride dealer.
Please see your Land Pride dealer if the vent plug
with dipstick was not included.
As
Required
Bearing in Blade Spindle Hubs
Type of Lubrication: Multi-purpose Grease
Wheel Support Bushings & Wheel Bearings
Type of Lubrication: Multi-purpose Grease
18752
17358
25
Hours
25
Hours