Life Fitness X8 - Manual (Page 21)

18
After adjusting the levelers, tighten the jam nuts (B) against the stabilizer to lock the
levelers in place.
Note: A common noise source on the cross-trainer is the failure to have all four
wheels completely off the foor and the jam nuts on the levelers tightened.
P
OWERING
U
P THE
C
ROSS
-T
RAINER
Your Life Fitness cross-trainer may come with either a U.S. power
cord or one of several international power cords. Insert the appropri-
ate power cord into the connector (C) on the back of the cross-train-
er. Then insert the plug into the wall outlet. Make sure the cord is
placed so it doesn't bind and will not be walked on. Turn the power
switch to on. Once the unit is turned on the cross-trainer’s stride
length will auto-calibrate. Wait one minute to allow for the calibration
to complete. Then check that both the main LCD display and activity
zone LCD light up. If not, recheck the plug and the wall connections
and make sure the wall outlet has power. If still not working properly,
check the connections made in Steps 4 and 8.
C
C
B