Linn WAKONDA User Manual

Page 21

To get out of BALANCE mode press

BAL

and

BAL

the same time, and the WAKONDA will revert to
VOLUME mode. Or to get to LISTEN mode, press

LISTEN

INPUT

LISTEN

When this indicator is lit, the WAKONDA is in LISTEN
control mode, and pressing

INPUT

will

change the input that you are listening to. If you press

RECORD

while already in LISTEN control mode the

WAKONDA will enter RECORD control mode.

RECORD

When this indicator is lit, the WAKONDA is in RECORD
control mode and

INPUT

will display and

control the input that is being sent out of the TAPE-
OUT sockets.

If the

RECORD

light is flashing, this means the WAKONDA

is in RECORD-LOCK mode and will not respond to
remote control commands from other rooms. To cancel
RECORD-LOCK mode, press

INPUT

and

RECORD

simultaneously.

MONO

When this indicator is lit the WAKONDA is operating in
MONO. To get back to stereo, press the pair of keys
marked

MONO

-- --

When no keys have been pressed for around 30
seconds, the WAKONDA will go to standby and the
display will show two dashes. To awake up the
WAKONDA the best thing to do is press either

VOL

LISTEN

and then check the display to see what state the

WAKONDA is in.

▲