Linn WAKONDA User Manual

Page 17

The display will show the input you have selected and the

LISTEN

indicator will light. There is a short delay as you step through inputs
while the volume fades down and then up again between inputs.
While the volume is fading, the

LISTEN

indicator dims. The lower the

volume control setting the shorter this delay will be.

VOL VOL

TO CHANGE THE VOLUME

press and hold the

VOL

Keys until

the desired volume level is reached. The

VOLUME

indicator will light,

and the volume will be displayed as a number from 0 to 60. Above step
4, each volume step is 1 dB.

MUTE

TO MUTE

the WAKONDA press the

MUTE

key. The music will fade out

and the

MUTE

indicator will light.

TO UNMUTE

the WAKONDA press the

MUTE

key again. The previous

volume setting will be displayed, the music will fade up and the

MUTE

indicator will go out. Pressing either of the

VOL

keys will

also unmute the WAKONDA.

LISTEN

TO DISPLAY THE CURRENT INPUT

when the display is asleep or is

showing the volume, press the

LISTEN

key once. The

LISTEN

indicator will light and the current input will be displayed. Pressing

INPUT

will also display the current input, if it is not already

displayed.

RECORD

TO SELECT AN INPUT TO RECORD

press the

RECORD

key. If the

LISTEN indicator lights, press

RECORD

again. The

RECORD

indicator will

light, and the display will show the input currently selected for
recording. Select the input you want to record by using the

INPUT

keys. The selected input is now fed out of both tape

outputs. You can listen to one source while you record another.

INPUT

and

INPUT

will continue to control the input you are

recording until you

▼