Linksys ULTRA RANGE PLUS WGA600N - Manual (Page 15)

Chapter4
Advanced Configuration
Dual-Band Wreless-N Gamng Adapter
WEP
Basic > Wireless > WEP
WEP Key Length Select a level of WEP encryption, 4 bts
(0 hex dgts) or 8 bts ( hex dgts). The default is
4 bts (0 hex dgts).
WEP Key Enter the WEP key used to access the network.
This is defined on the access point or router that you are
connecting to.
Default WEP Key Select the transmit key used to access
the network. The default value is .
Authentcaton Select the appropriate authentication
method used to access the network.
NOTE: WEP is not supported by Draft 11N
specifications. If your network uses WEP, the
Adapter will only operate in 802.11B/G modes.
WPA
Basic > Wireless > WPA
WPA
WPA Mode The default setting, Auto (WPA or WPA)
will automatically select the appropriate mode used on
your network. If necessary, the mode can be selected
manually.
Cpher Type Select the algorithm used on the network,
TKIP or AES. (AES is a stronger encryption method than
TKIP.)