Lincoln Electric COMMANDER 500 IM644-A - Manual (Page 47)

F-11 DIAGRAMS F-11
COMMANDER 500
CONNECTION DIAGRAM:
N.B. USE VOLTMETER SWITCH TO SELECT DESIRED ELECTRODE POLARITY.
TO WORK
ELECTRODE CABLE
AMPHENOL
TO WORK
WORK CLIP LEAD
LN-25
WIRE FEEDER
OPTIONAL K444-1 REMOTE CONTROL
TO WORK
ELECTRODE
AMPHENOL
WITH OPTIONAL K444-1 REMOTE CONTROL
COMMANDER/ LN-25 ACROSS THE ARC CONNECTION DIAGRAM
6 PIN
14 PIN
S23994 7-18-98
N.D. THE OUTPUT CONTROL SWITCH MUST BE IN THE "WELDING TERMINALS ALWAYS ON" POSITION . N.C. IF REMOTE OUTPUT CONTROL IS USED, PLACE LOCAL REMOTE SWITCH IN "REMOTE" POSITION. N.A. WELDING CABLE MUST BE OF PROPER CAPACITY FOR THE CURRENT AND DUTY CYCLE OF IMMEDIATE AND FUTURE APPLICATIONS. SEE OPERATING MANUAL.
Only qualified personnel should install,use
before servicing.
or service this equipment. Keep away from moving parts. Keep guards in place.
Disconnect NEGATIVE (-) BATTERY LEAD Do not touch electrically live parts. Do not operate with panels open.
WARNING