Linksys WCG200 - Manual (Page 35)

63
Wireless-G Cable Gateway
62
6. When the “Wireless Network Connection Properties” window appears,
click the Wireless Networks Tab.
7. If the appropriate wireless network, specified by the Gateway’s SSID, is
displayed in the “Preferred networks” section, double-click it and continue
to the next step.
Otherwise, click on the appropriate wireless network, specified by the
Gateway’s SSID, in the “Available networks” section. Then, click the
Configure button.
Figure B-6
Figure B-7
If a “Connect to Wireless Network” window appears, in the Available
Networks section, click the desired wireless network, specified by the
Gateway’s SSID. Then, double-click the Wireless Network Connection
icon.
5. When the “Wireless Network Connection Status” window appears, click the
Properties button.
Figure B-4
Figure B-5